Rule 4-H53SP Guía De Instrucciones página 7

Congratulations!
Congratulations
You have just purchased one of the finest quality pumps
available in the industry. It was developed after years of
experience, research and testing by our research staff. Its
motor, electronics and seals were specifically designed and
manufactured by Rule Industries to give years of reliable,
trouble-free performance.
how This Pump Works
Rule Automatic Pool Cover Drain Pumps turn on and check
for water approximately every 2-1/2 minutes. During this
"check", the pump runs for about one second and checks for
resistance or drag against the impeller. If resistance (water)
is found, it will run for as long as water is present. When all
the water is pumped out, the pump shuts off and returns to
its 2-1/2 minute test cycle. The pump can be started at any
time by disconnecting it from the power source, waiting for
five seconds and reconnecting to the power source.
Please read and follow the instructions carefully and
your pump will provide you with the maximum output
and the life for which it was designed.
Thank You for Purchasing a Rule Pump