Specific Safety Warnings - METAWOOD MTDG1280-156 Traducción De Las Instrucciones Originales

Keep the handles dry, clean and free of any
lubricant and any grease.
15 - Disconnect tools.
- Disconnect tools from the power supply when they
are not in used, before servicing and during
replacement of accessories such as blades, drills
and cutting devices.
16 - Remove adjustment keys.
- Acquire the habit of checking that keys and other
adjustment devices have been removed from the
tool before starting it.
17 - Avoid all accidental starting.
- Check that the switch is in the "off" position when
connecting.
18 - Use external connection cables.
- When the tool is used outside, only use extension
leads intended for external use and with
corresponding marking.
19 - Remain vigilant.
- Watch what you are doing, demonstrate common
sense and do not use the tool when you are tired.
20 - Check damaged parts.
- Before using the tool for other purposes, examine
it carefully to determine whether it will operate
correctly and accomplish its planned function.
- Check the alignment or locking of the moving
parts, and the absence of any broken parts or any
fixing and other conditions that are likely to affect
the operation of the tool.
- A protective guard or other damaged part should
be repaired or replaced by an approved
maintenance centre, unless stated otherwise in this
instruction manual.
- Have defective switches replaced by an approved
maintenance centre.
- Do not use the tool if the switch does not permit
change from the on state to the off state.
21 – Warning.
- The use of any accessory or any fixing other than
that or those recommended in this instruction
manual can present a risk of injury to persons.
22 - Have the tool repaired by a qualified person.
- This electric tool satisfies the corresponding safety
rules. Repairs should only be made by qualified
persons using original spare parts. Not doing this
can expose the user to significant danger.
Packing materials are no toys!
Children must not play with
Danger of suffocation!
WARNING
plastic bags!
In this manual and/or on the machine the following
symbols are used:

SPECIFIC SAFETY WARNINGS

DO NOT let familiarity with this product, gained from
repeated use, replace strict adherence to
planer safety rules. If you use this tool unsafely or
incorrectly, you can suffer serious personal
injury.
Always unplug your powertool before any repair,
maintenance or when replacing the cutting
blades.
User :
- Always stand on the side of the entrance and exit
where you jointer table.
- Do not stand in front of the entrance and the power
output of the machine.
- Wear safety glasses.
- Wear ear protection.
- Do not use the machine without guards.
Blades :

- Handle the blades very carefully.

- Use appropriate sharpened cutters adapted to
the appliance

- Tighten the planer blade installation bolts
securely before operation.

- Check the blades carefully for cracks or
damage before operation. Replace cracked or
damaged blades immediately.

- Every part of the unused cutters should be
protected.
20
Warning / Danger!
Read manual before
use.
Wear ear protection.
Wear eye protection.
Always wear a dust
mask.
In accordance with
essential applicable
safety standards of
European directives
Double insulated