Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6. Next, tighten both of the tension knobs at the top at the same time by turning them clockwise
(6A). Meanwhile , keep the gap between gate panel and right upper corner about 0
Make sure there is always a gap between gate panel and right upper corner so that the gate
can fully close (6B). Beware the gate is securely fastened at both top and bottom.
Once tted, the safety gate should be checked to ensure that it is properly xed and secured.
6A
tighten inward and align the indicator lines
7. To use the wrench: Once the tension knobs are di cult to turn by hand, use the wrench to
tighten the knobs (7A,7B).
7A
8. Operation for locking system :
First step : Switch the side part of locking handle vertically.
Second step : Press the release button according to the direction of arrow.
Third step : Lift up the gate.
Fourth step : Swing door open in either direction.
Fifth step : Lock the door by turning the side part of locking handle to horizontal position (8B).
8A
3
4
4
2
1
5
6B
a gap between gate
panel and right upper
corner
7B
8B
To close the gate by switching
the side part of locking handle
to horizontal position.
59" .
.
keep this gap about
0
59"
.
1 5
Page 6
Publicidad
Tabla de contenido
