Publicidad
Step
Step 6
Flip the RIGHT UPRIGHT (C) over and lay the LEFT
å
UPRIGHT (D) next to it with the SAUDER TWIST-LOCK®
FASTENERS down.
Fasten the EXTENSION BLOCKS (W) to the
å
UPRIGHTS (C and D). Use four GOLD 7/8" FLAT
HEAD SCREWS (110S).
Fasten the CABINET RIGHT (40CA) to the EXTENSION
å
BLOCK (W) on the RIGHT UPRIGHT (C) and the
CABINET LEFT (40CB) to the EXTENSION BLOCK (W)
on the LEFT UPRIGHT (D). Use four GOLD 5/16" FLAT
HEAD SCREWS (3S) through holes #1 and #3.
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
Roller end
2
1
W
Finished edge
www.sauder.com/services
3S
4
3
D
Roller end
1
2
3
4
W
418299
GOLD 7/8" FLAT HEAD SCREW
(4 used for the EXTENSION BLOCKS)
Finished edge
C
110S
Page 11
Publicidad
