Publicidad
Step 24
Step
1
D28
Q
Groove
Insert the LARGE DRAWER SIDES (D28 and D29)
å
at an angle into the slot at each end of the LARGE
DRAWER FRONT (Q).
3
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
BACK groove.
Fasten the LARGE DRAWER BACK (D78) to the LARGE DRAWER SIDES (D28 and D29). Use four BLACK 1-9/16" FLAT
å
HEAD SCREWS (30S).
NOTE: Be sure the LARGE DRAWER BOTTOM ( D707) inserts into the groove of the LARGE DRAWER BACK (D78).
å
Repeat this step for the small drawer using parts D20, D21, D74, D716, and O.
å
www.sauder.com/services
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D29
D78
D28
D707
VIEW THE T-LOCK BOX VIDEO
2
U n
fi n
s u
r f a
D707
D28
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the LARGE DRAWER BOTTOM (D707 ) into the
å
grooves in the LARGE DRAWER SIDES (D28 and D29) and
LARGE DRAWER FRONT (Q).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D29
418299
With the palm of your
hand, tap the DRAWER
BOTTOM down into
the groove.
i s h
e d
c e
D29
Q
30S
(8 used in this step)
Page 29
Publicidad
