KALLISTA P22134 Guia De Instalacion página 5

Gasket
Hose End
with O-Ring
3. Install the Handshower
Remove the locking nut, washers, and sleeve from the holder.
Slide the holder through the mounting hole from above the
mounting surface.
Insert the hose end with O-ring through the top of the sleeve.
From underneath the mounting surface, reinstall the sleeve,
washers, locking nut, and nut to the holder.
Wrench tighten the locking nut.
Ensure the gasket is in place at the end of the handshower.
Thread the hose end with O-ring and gasket to the handshower.
Seat the handshower into the holder.
Kallista
Handshower
Sleeve
Hose
Holder
Nut
Mounting
Surface
Washers
Locking Nut
Hose End with Nut
Attach to faucet or valve.
Gasket
5 1008412-2-C