Appliance Description - Beurer MG 310 Instrucciones Para El Uso

5. Appliance description

Shiatsu Massage Chair (front)
1
4
5
3
7
8
9
10
hand switch
10
6. Start-up
CAUTION
• IMPORTANT: Before using the device for the first time ensure you have released the transport
lock for the massage mechanism. To do this, remove the screw using the tool provided on the
rear of the massager. If the transport lock screw is not first removed and the device is used
straight away, the device will become irreparably damaged and unusable. The warranty will
not apply in this instance.
• Reuse the transport lock screw when transporting the device in the future. Transporting the device
without using the transport lock could cause irreparable damage to the device.
• Assemble the chair by resting it on the rear legs and unfolding it.
• Back rest and seat height can be adjusted individually.
– Seat height: To adjust the seat height, turn the knobs at the same time and make sure that the two knobs''
end positions are at the same height.
– Back rest: Hold on to the back rest and turn the ring (5) until the stopper fits through the opening and
allows you to adjust the back rest. When you have reached the desired position, turn the opening of the
ring away from the stopper. Complete this procedure consecutively for both sides and make sure that
the end position of the rings is identical on both sides.
2 3
5
1
2
3
4
5
6
7
8
9
1 Neck pillow
2 Removable protective covers (seat, back)
3 Removable protective covers (arm rests)
4 Four massage heads
5 Set the position of the back rest
6 Knob to adjust the seat height
7 Hand switch
8 Storage bag
9 Connecting coupling
10 Power supply unit with plug connector and
power cable
6
1 Button
2 FULL BACK button (entire back massage)
3 UPPER BACK button (upper back massage)
4 LOWER BACK button (lower back massage)
5 HEAT button (heat)
6 SPOT buttons (localised massage)
7 SPEED button (massage intensity)
8 SHIATSU button (Shiatsu massage)
9 ROLLING button (rolling massage)
10 DEMO button
12