Maintenance; Secondary Filter; Rug And Floor Nozzle - Hoover PORTAPOWER CH30000 Manual Del Usuario

Contenedor portátil
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance

WARNING
SERVICING.
Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into
water, take it to a service center prior to continuing use.
The Bag
Check bag from time to time and empty when necessary. When the bag is filled with dirt, the cleaner will not
operate efficiently. Never operate cleaner without the bag.
CAUTION: Very fine materials, such as face powder or cornstarch will seal the pores of the bag. When the
cleaner is used to remove material of this nature, the bag should be emptied frequently.
Empty Bag

Secondary Filter

Rug and Floor Nozzle

To maintain cleaning effectiveness of your rug and floor nozzle, brushes may need to be replaced occasionally.
See your nearest Hoover Factory Service Center or Authorized Warranty Dealer for new brushes.
10
TO REDUCE THE RISK OF PERSONAL INJURY–UNPLUG BEFORE CLEANING OR
1
Bag is located behind bag door at front
of cleaner.
Remove hose and set cleaner on end.
Turn bag door lock clockwise and open door.
Remove bag by grasping tab on inside of bag
ring and pulling bag from cleaner.
Hold bag ring firmly on a paper while shaking
bag vigorously until it is clean. The bag may
also be turned inside out for a
thorough cleaning.
Replace bag. Use crevice tool or similar
object to push bag into proper position. Bag
ring should be seated firmly against ridges
in cleaner.
2
The secondary filter protects the motor from
dirt particles. It is located at the front of the
bag compartment. When bag is removed,
check filter, which is not removable. If filter
is dirty, remove dirt with a small brush.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido