Hoover PORTAPOWER CH30000 Manual Del Usuario página 9

Attach Tools
4
Attach tools to end of hose by rotating
plastic latch ring until slots align; insert
tool and rotate latch ring to lock. To
remove tool, reverse above procedure.
Attach tool to either extension wand by
pushing button projection end of tool
into spring latch of wand. Latch will
snap into place when locked together. To
disconnect, press down on the center of
the spring latch and remove tool.
6
Turn vacuum on by pressing power
switch forward to the ON position ( I )
Turn off by pressing power switch
backward to the OFF position ( O ).
9
Blower
5
Used to blow dirt out of areas where it
is impossible for suction to reach. To use
blower, turn hose connector as shown
and remove hose from bag door. Pull up
louvered door at back of cleaner and insert
hose connector into corresponding slots
in opening. Turn hose connector in either
direction until it locks into place.