Publicidad
Idiomas disponibles
Idiomas disponibles
5. Bumper removal: Remove the (8) bolts holding the bumper in place
and return the fasteners to the owner.
7. Hitch installation: Raise the hitch and bumper into position as shown,
and attach using the fasteners provided.
©2016 Cequent™ Performance Products, Inc. -
Printed in Mexico
6. Bumper trimming: using a die grinder remove the material shown in Figure 2.
Both sides
8. Tighten all M8 CL8.8 fasteners with torque wrench to 20 Lb.-Ft. (27
N*M).
Proper torque is needed to keep the hitch secure to the vehicle when
towing.
Sheet 5 of 18
24946NP
Inside
fascia
Bumper
Inside fascia
interference
6-17-16
Rev. A
Publicidad
