Installation; Selection The Best Location; Fixing Installation Plate - LG Multi V 2 Serie Manual De Instalación

Installation

Installation
Read completely, then follow step by step.
Selection of the best location
There should not be any heat source or steam
•
near the unit.
• There should not be any obstacles to prevent the
air circulation.
• A place where air circulation in the room will be
good.
• A place where drainage can be easily obtained.
• A place where noise prevention is taken into con-
sideration.
• Do not install the unit near the door way.
• Ensure the spaces indicated by arrows from the
wall, ceiling, fence, or other obstacles.
The mounting wall should be strong and solid
enough to protect it from the vibration.

Fixing Installation Plate

The wall you select should be strong and solid
enough to prevent vibration
1. Mount the installation plate on the wall with
type "A" screws. If mounting the unit on a con-
crete wall, use anchor bolts.
• Mount the installation plate horizontally by aligning
the centerline using a level.
2. Measure the wall and mark the centerline. It is
also important to use caution concerning the loca-
tion of the installation plate-routing of the wiring to
power outlets is through the walls typically. Drilling
the hole through the wall for piping connections
must be done safely.
CHASSIS
A
SE 70(2-9/16)
S5 100(3-15/16) 122(4-4/15) 240(9-7/16) 122(4-4/5)
8 Indoor Unit
Distance [mm(inch)]
B C D
110(4-5/15) 90(3-7/13) 110(4-5/15)
Front
Down right
Right Rear right
More than
100 mm
Higher than eye-level
Installation Plate
Chassis
Hook
Type "A"
<SE>
Installation Plate
Chassis
Hook
Type "A"
<S5>
Installation plate
D
C
Ø70mm
(Ø2-9/16 inch)
<SE>
Left rear piping
Installation plate
Ø70mm
133mm
(Ø2-9/16 inch)
Left rear piping
<S5>
Left
Rear left
Lower than 2.3m
More than 200 mm
More than
100 mm
B
A
Ø70mm
(Ø2-9/16 inch)
Right rear piping
Ø70mm
100mm
(Ø2-9/16 inch)
Right rear piping