Pinnacle Climate Remington REM-L180ALT-F Manual Del Usuario página 27

Fig. 34—LCD Screen
1
4
ROOM SET
6
ROOM SET
Fig. 35—Setting Temperature Units
Fig. 36—Manual Function
Screen while
pressing the
ON key
Screen while
pressing the
OFF key
©2017 Pinnacle Climate Technologies
Remote Control Operation (cont.)
2
3
5
TEMP
TEMP
TEMP
TEMP
TEMP
Screen after
the 3-Second
Default
TEMP
Screen after
the 3-Second
Default
LCD Screen (see Fig. 34):
1. DISPLAY Indicates CURRENT room temperature.
2. °F OR °C Indicates degrees Fahrenheit or Celsius.
3. FLAME
Indicates burner/valve in operation.
4. ROOM
Indicates remote is in THERMO operation.
5. TEMP
Appears during manual operation.
6. SET
Appears when setting the desired
temperature in the thermo operation.
Setting °F / °C Scale (see Fig. 35):
The factory setting for temperature is °F. You can
change this setting to °C by pressing the "ON" key
and the "OFF" key at the same time. Follow this same
procedure to change from °C to °F.
Manual Function (see Fig. 36):
To operate the remote system in the MANUAL MODE,
do the following:
ON OPERATION
Press the "ON" key and the heater flame comes on.
During this time, the LCD screen shows "ON. " After three
(3) seconds, the LCD screen defaults to display the
room temperature, and the word "TEMP" shows on the
screen. The flame icon also appears on LCD screen in
the MANUAL MODE.
OFF OPERATION
Press the "OFF" key and the heater flame shuts off.
During this time, the LCD screen shows "OFF. " After
three (3) seconds, the LCD screen defaults to display the
room temperature and the word "TEMP" shows on the
screen.
27 Vent-Free Gas Log Heater User Manual