Assembly - Vax X3 Manual De Propietario

TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
1.
Pull cleaning wand to the front
of the cleaner and press hose
into handle assembly.
4.
Using a Phillips or Flat Head screwdriver,
secure the handle by inserting the
provided four screws into the back of
the handle.
6
2.
Insert excess cord into handle of
the cleaner by pushing down into
lower handle. CAUTION: AVOID
PINCHING CORD WHILE
INSERTING INTO HANDLE.
5.
Connect the cleaning wand to
the opening on the base and push
the wand handle towards unit
until it snaps into place.
3.
Align handle onto base of cleaner.
TRANSPORTING
YOUR CLEANER
1.
NOTE: Do not
carry vacuum
cleaner by the
cleaning wand
tube.This is not
a carry handle.
Use carry handle located on dirt
container lid.