Auxiliary Functions - ELECTRODRIVE CDC Manual Del Operador

Auxiliary functions

Diverter valves activation
Diverter 3: keep button P2 pushed (signal pin5).
This will activate the 3rd function.
It's a momentary activation function
Diverter 4: keep pushed together buttons P1, P3 and P4 (signal pin6).
This will activate the 4th function (=hydraulic implement
locking).
It's a momentary activation function
Locked diverter #3
On: Push together buttons P4 and P2.
Diverter # 3 will be energized (signal pin5).
It's a maintained activation function.
Off: Pushing again only P2, the function will be deactivated.
Diverter# 3 will be disengaged.
Reduced speed
On: Push the green button P4.
The led L1 turns on.
It's a maintained activation function.
Off: Pushing again P4 the "reduced speed" function will be deactivated.
The led L1 will turn off.
This function will always be deactivated when the system is switched off.
Arm suspension function
On: Push the yellow button P5 (signal pin4).
The led L2 turns on.
It's a maintained activation function.
Off: Pushing again P5 the "arm suspension" function will be deactivated.
The led L2 will turn off.
The "arm suspension" function will remember its state when the system is switched off.
- 4 -