ELECTRODRIVE CDC Manual Del Operador página 7

Activating AAC
keep pushed button P3 and move handle forward (signal pin1).
It's a momentary activation function
Bale wrapper/gritting implements
keep pushed button P2 and move handle
sideways for 10sec (signal pin 5).This will
activate the 3rd function and directional valve for
continuous flow to connected implement.
Moving handle i opposite direction disengage
function.
It's a maintained activation function
Optional function
keep pushed together buttons P1, P2 and P5 (signal pin7).
Pushing again only P5, the function will be deactivated
It's a maintained activation function
This function is aimed for loaders with AutoSafe
Note
-Activating a function not mounted/connected will give a
errorcode on the joystick.
- If the powerindication (P0) is not lightning when starting
the system, please check
-that the joystick is connected to control box
- that the power supply is correctly connected to battery
(plus and minus not interchanged)
- that voltage is minimum 9VDC
- if errorcodes appear on the LED's, on both joystick and
control box, please look in the errorcode list
- 5 -