Selecting Vox Sensitivity; Selecting The Energy Saving Mode - Tribe interphone Manual Operativo

and the other users will hear a warning sound (double BEEP) after
which another user can start talking.
During the radio transmission, the TX (transmission) icon appears on
the display. It disappears when the transmission ends.
The Vox mode can be set on three different sensitivity levels – based
on external noise and/or where the device is being used.
NOTES: you will only be able to communicate with other users tuned
in to the same channel.
Bear in mind that voice activation is never immediate so some
syllables of the first word you say might be lost: before you actually
start talking it is a good idea to first say your name or the name of
the person you are calling or simply a word you have agreed upon.

4.1 Selecting Vox sensitivity

a. Press the MENU key seven times. The Vox icon appears on the
display and OF flashes.
b. Press the UP or DOWN key to select Vox function sensitivity.
Voice activation sensitivity can be set on three different levels:
L1, L2 and L3.
TRIBE reacts to the slightest noise (including background noise)
when set on the highest level.
TRIBE reacts only to high intensity noise when set on the lowest
level.
c. Press the MENU push button to store the setting and return to
the standby mode.

4.2 Selecting the Energy Saving mode

To increase battery life TRIBE can be set in the energy saving "LO"
mode.
In the "LO" mode TRIBE can reach a maximum distance of about
4Km with an approximate energy saving of 30%.
In the "HI" mode TRIBE uses maximum power and can reach a
maximum distance of approximately 12Km.
a. Press the MENU key eight times: the HI or LO icon starts
flashing.
b. Press the UP or DOWN key to select the HI (up to 12KM) or LO (up
to 4Km) function.
c. Press the MENU push button once to store the setting and return
to the standby mode.
EN
33