Publicidad
Idiomas disponibles
Idiomas disponibles
Bead Lock Capable Wheel Mounting
ON ROAD USE
1.
Remove Trim Ring (2) and fasteners (4) from
wheel.
2.
Mount tire as normal, using a tire machine.
3. Position ring (2) on wheel, aligning bolt holes.
Hand thread bolts.
4.
Hand-tighten the bolts in the following
sequence, ensuring uniform gap between the
ring and wheel surface.
5.
Making sure there is no gap between the
wheel surface and ring, torque bolts to
27 N-m (20 lb.-ft.) in the same sequence.
6.
Inflate tire to recommended pressure.
7.
Balance wheel/tire/ring assembly.
8.
Mount tire/wheel/ring assembly to vehicle.
9.
Install Center Cap (3) or (7).
10.
Fold and place instruction sheet in the
vehicle's glove box.
7/27/2017
www.mopar.com
4
2
1 5
K6862718AB
2
4
2
1 5
Publicidad
