Wiseup WIFI07 Guia Del Usuario página 15

insert it to the SD card slot again, power on the camera again.
Q: My PC computer is unable to read the SD card directly from the device?
A: Remove the SD card from the camera, then use a card reader to read it on your
PC. Make sure the camera is powered off before removing the Micro SD card.
Q: How many mobile devices can connect to the camera at the same time?
A: No limit.
Q: How many cameras are supported on the mobile application?
A: No limit.
Q: How to turn on the IR LEDs?
A: When the illumination is below 10 lux, the IR LEDs will be turned on automatical-
ly. The IR distance is 2 meters.
Q: How to play back the video saved in the Micro SD card?
A: Use a card reader to read and play back the video on your PC computer. Or use
the "Camwf" APP to play back (See 5.5)
Q: Is there any PC client software I can use on my computer?
A: PC client software download link: http://www.mymitech.com/download.html
Q: Why the camera doesn't respond after I press the reset button twice?
A: If the WAN and LAN indicator lights don't react like the chapter VIII said, that
means you didn't press the Reset Button right. Please try it again.
Q: Why is time display not stable, always blinking?
A: If you are using the backup battery, please recharge it. If not, check if he power
adapter is connected properly.