Wiseup WIFI07 Guia Del Usuario página 6

[Note]:
If a wrong password is entered, or if the device failed to connect to the router, we
recommend you reset the camera to factory default in the P2P mode. To do this, press the
Reset Button twice.
How to check if remote view function works?
1. Back to the WIFI or WLAN setting page on your phone or mobile device, exit
your phone or mobile device from the current WIFI network, enroll your phone or
mobile device in another WIFI hotspot, or you can turn off the WIFI or WLAN func-
tion, enable your mobile network data.
2. Make sure your phone or mobile device has Internet access, launch the
"Camwf" APP again. If the camera shows "Online" on the home page, it means the
remote view setup is successful and the camera has entered into WAN mode. You
can go ahead to view live video or recorded video remotely from any location. The
WAN Indicator light will be solid yellow.
Tips: If the camera shows "Connection failed" on the home page, tap the Re-