Wiseup WIFI40 Manual De Usuario página 6

4.4 Watch the live video in the WAN mode.
4.4.1 Exit APP "Plug&Play" or "P2PCamViewer", go back to WIFI or WLAN setting page on
your mobile device, disconnect your mobile device from the current WIFI hotspot, enroll your
mobile device in another WIFI hotspot, or you can enable your mobile data connection.
4.4.2 Re-launch the APP "Plug&Play" or "P2PCamViewer" .
4.4.3 Tap "WAN" or "My cameras", login the camera by inputting the camera's id and the login
password printed on the back of camera.
4.4.4 You could now watch the live video or remote control this camera in the WAN mode if the
camera is showing "Online", and the red indicator light keeps flashing.
Note: If the camera is showing "Offline", it means the remote network configuration failed and
you need to go back to 4.3.2 or 4.3.3 to check if the password of the wifi hotspot is wrong, or
restart the remote network setting.