Automatic Shutdown - Shoefresh SF50 Manual De Instrucciones

operation
automatic start
You have to do next to nothing to freshen up
and dry your shoes. Once you have plugged
in the unit, your Shoefresh is immediately on
standby and is ready to use. The Shoefresh will
automatically start with the pre-set programme
as soon as you place your shoes on the holders.
The default for the unit is 5 minutes for the
sterilization process, followed by 20 minutes
drying at 60 degrees.

automatic shutdown

As soon as the programm is finished the
Shoefresh will shut down by itself. If you place
shoes over the shoe holders or press any button
it will turn back on again. The fan will keep
running for 10 seconds after completion of the
programm.
STZ °C STZ
DRY MIN DRY
Fig. 1 Fig. 2
setting the shoefresh
You can easily preset the sterilization process
and drying programme by pressing the Setting
button. You can adjust the length of time for
the deodorising, in the same way that you
can adjust the drying time and the drying
temperature. The settings you used last are
automatically saved.
°C STZ °C
MIN DRY MIN
Fig. 3
22
step 1 – sterilize (stz)
During this step, all odours, bacteria and fungi
are removed.
setting the time for erasing odours, bacteria
and fungi (stz)
Press the Settings button a couple of times
until STZ 05 MIN displays (Fig.1), then press the
- button to decrease the time, or + to increase
the time. The minimum sterilizing time you can
set is 0 minutes and the maximum time is 10
minutes.
If you do not want to run the
TIP
deodorisation process and you only
want to dry your shoes, set STZ at
0 minutes.
step 2 - drY
Your shoes are dried during this step.
set the drY temperature
Press the Setting button a couple of times
until DRY 60 °C displays (Fig.2), then press
the - button to decrease the temperature or
+ to increase the temperature. The minimum
drying temperature you can set is 40°C and the
maximum drying temperature is 60°C.
checking the drY temperature
Press and hold the Settings button for a couple
of seconds to view the current temperature
inside the shoes.
set the drY time
Press the Settings button a couple of times
until DRY 20 MIN displays (Fig.3), then press
the - button to decrease the drying time or + to
increase the time.The minimum drying time you
can set is 0 minutes and the maximum time is
40 minutes.
If you do not want the drying process
TIP
to run and you only want to deodorise
your shoes, set DRY at 0 minutes.
23