Cleaning And Maintenance; Cleaning The Appliance; Cleaning The Turbo Brush - Imetec L1907 Manual De Instrucciones

• Disconnect the plug (7) from the recharging contact (6) [Fig. D1] .
• Press the ON/OFF switch (8) once to switch the vacuum cleaner on or off.
• The appliance switches on with MEdIUM power level [Fig. E1].
EN
SUCTION POWER REGULATION:
• act on the power regulation button (9) to adjust the power.
• Each time the button is pressed, the power level will turn, in sequence:
• from Medium to Max (all 3 LEds On)
• from Max to Min (First LEd on)
• from Min to Medium (First and second LEd on) [Fig. E1].
• Using the various power levels implies different cleaning autonomy. The following table
shows the average autonomy duration at the three power levels of the various versions.
Version
37v
NOTE:
• A new appliance can develop odours the first few times it is used. These
odours are harmless and disappear shortly afterwards. Ventilate the room.
• The transparent walls may become opaque with use.
• When you have finished using the appliance, press the ON/OFF button (8) to switch it off.
WARNING! Always disconnect the appliance from the mains
supply before cleaning or performing maintenance.
WARNING! Periodically verify that filters and the inlet
opening are not clogged.
WARNING! DO NOT use solvents or other aggressive or abrasive
detergents in order not to damage the appliance surfaces.
WARNING! Make sure all cleaned parts are completely dry
before reusing the appliance.

CLEANING THE APPLIANCE

• Disconnect the plug (7) from the recharging contact (6) [Fig. D1].
• Switch the appliance off before cleaning it.
• When necessary, clean the appliance with a damp cloth.

CLEANING THE TURBO BRUSH (13)

• Using scissors, cut any hair or fluff stuck in the brush (13d), being careful not to cut yourself.
16
MIN Position
about 120 min

CLEANING AND MAINTENANCE

MED Position
about 25 Min
MAX Position
about 18 min