Publicidad
Idiomas disponibles
Idiomas disponibles
Cable Tunnel Installation
NOTES
:
● This product is NOT recommended for brick, plaster, or wallpapered walls.
● If wall has been painted, allow paint to cure at least 30 days before installing cable tunnels.
● Wipe away any dirt, dust, grease, etc. on the surface and let dry completely before installing.
● The tunnels
can be painted to match your wall.
03
● The tunnels
can be cut to fi t the length required.
03
To Remove Adhesive Clips
1. Insert a fl at object (e.g. - knife blade) behind the clip and the adhesive pad and pry off the plastic clip.
2. Peel off the adhesive pad with your fi ngers.
3. If adhesive residue remains, use a cloth soaked in an organic solvent to wipe away the residue.
IMPORTANT:
2
First test the solvent in a concealed spot to make sure it will not damage the wall surface.
Publicidad
