Descargar Imprimir esta página

Sanus accents A302 Manual De Instrucciones página 5

Túnel de cableado

Publicidad

Idiomas disponibles

Idiomas disponibles

4
01
02
03
Arrange your wires on either side of the clips.Reattach the tunnels
clip
making sure to capture the wires behind them. Press firmly along the length of the
02
tunnels where the clips are located until clips snap in place.
NOTE: Leave enough slack in the cables/wires above the tunnel to prevent them from
interfering with or rubbing against the tunnel when moving the TV.
This could cause the tunnel to separate from the clips.
TIP: Taping the cables/wires in place above and below the tunnels to hold them will
make reattaching the tunnels easier.
03
03
01
02
03
to the clips
and
01
5

Publicidad

loading