BOND MANUFACTURING HYFP20018-10 El Manual Del Propietario página 6

ASSEMBLY INSTRUCTIONS
*If you have opened the carton and removed all packages, please disregard the STEP 1 and 2.
STEP 1.
Open and lift off the carton
carefully and be wary of the accessories
inside falling away. Take away the box
containing lava rocks.
See Figure STEP 1.
See below Figure #1 to Figure #6 for how to assemble the table.
Note: You must follow all steps to properly assemble the firebowl.
DO NOT attempt to assemble without proper tools and protection to the human body.
1.Assemble the door to the left
side panel. Make sure the
hinges are set up completely.
See Figure 1.
2.Connect the 2 pcs of side
panels and the door to the
Pedestal by 2 pcs of M5x10
screws. See Figure 2.
3.Connect the rear panel to the
Pedestal by 2 pcs of M5x10
screws. See Figure 3.
4. Put the table top with bowl
on the table main frame.
Note: Make sure the control
knob is right facing the door.
See Figure 4.
* Please keep this owner's manual for future reference.
See the STEP 3 directly.
Figure 1
Figure 3
STEP 2.
Remove all the polyfoam rounding the firebowl and
take all parts out for the assembly purpose.
See Figure STEP 2.
Figure 2
Figure 4
6