Installation Instructions; Before You Begin; Tools You Will Need - GE IM-5D Manual Del Propietário

Installation
Instructions
Questions? Call 800.GE.CARES (800.432.2737)
In Canada, call 1.800.561.3344

BEFORE YOU BEGIN

Read these instructions completely and carefully.
IMPORTANT –
•
for local inspector's use .
IMPORTANT –
•
codes and ordinances .
Note to Installer –
•
instructions with the Consumer .
Note to Consumer –
•
for future reference .
• Skill level – Installation of this appliance requires
basic mechanical and electrical skills .
• Completion time – 20–60 minutes
• Proper installation is the responsibility of the
installer .
• Product failure due to improper installation is not
covered under the Warranty .

TOOLS YOU WILL NEED

1/4" Nut Driver
Small Flat-head
Screwdriver
CONTENTS OF KIT IM-5D
Icemaker
ICEMAKER
WARRANTY VERIFICATION
Warranty Label
8
Save these instructions
Observe all governing
Be sure to leave these
Keep these instructions
3/8" Socket
Ratchet/Driver
Icemaker Fill Cup
Installation
Instructions
Hex Head Screw
Installation
Instructions
Icemaker Kit
or
Visit our Website at:
or
Visit our Website at:
WARNING
electric shock or injury during installation,
you must first unplug the refrigerator
before proceeding . Failure to follow these
instructions can result in electrical shock .
DAMAGE – SHIPMENT/INSTALLATION
• If the unit is damaged in shipment, return the unit to the
store in which it was bought for repair or replacement .
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer .
• If the unit is damaged by the installer (if other than
the customer), repair or replacement must be made by
arrangement between customer and installer .
SHUT OFF THE WATER SUPPLY
Shut the water off at the water vlave .
Saddle-Type
Shutoff Valve
Large Ice Bucket*
(3/4")
Ice Bucket Cover
(for large ice bucket)
IM-5D
GEAppliances.com
geappliances.ca
To eliminate the risk of
Small Ice Bucket*
(for counter depth models)
*Kit comes with 2 ice buckets .
The smaller is for counter
depth models . Use extra
bucket for additional ice
storage or recycle .