Publicidad
Idiomas disponibles
Idiomas disponibles
Lower Exhaust– Lower exhaust using 15mm socket to remove (2) bolts
attaching the exhaust bracket to rear of vehicle, one each side.
Note: Support exhaust to avoid damage.
Trim heat shield using tin snips as shown.
Note: Dimensions are approximate, confirm fit prior to trimming.
©2018 Horizon Global Americas Inc. - Printed in Mexico
Lower and trim heat shields– Use needle nose pliers to loosen (4) speed
nuts on driver side and (2) speed nuts on the passenger side. Trim heat
shield using tin snips as shown in Figure 2. Note: Dimensions are
approximate, confirm fit prior to trimming.
Fishwire fasteners – Fishwire (2) carriage bolts and (2) HE-2370-000
spacers through the access hole in each frame rail as shown. Reinstall the
trimmed heat shields.
Sheet 4 of 15
36661NP
Access
Hole
04-05-18
Rev. A
Publicidad
