Use Of The Bicycle - Cicli Esperia 1281 Manual De Usuario Y Certificado De Garantia

4.

Use of the bicycle

4.1. To turn on the bicycle, press the power switch located on the side of the battery.
4.2. Press the display button on the handlebars indicated in the righthand pane. The
controller will turn on into mode A, which is the one that
guarantees minimum motor power and maximum bicycle
autonomy.
The "low" speed will light up.
4.3. If you wish to increase the motor assist power to
medium mode, just press the "+" button and the second
controller LED will turn on.
4.4. If you wish to increase the motor assist power to
maximum mode, just press the "+" button and the third
controller LED will turn on.
4.5. If you wish to decrease the motor assist power,
simply press the "-" button until the LED that determines
the medium or minimum assist power switches on.
CAUTION:
DO NOT PRESS THE "+" AND "-" BUTTONS AT THE
SAME TIME. THE LEDS ON THE RIGHT OF THE "+"
BUTTON INDICATE THE BATTERY CHARGE LEVEL.
THE BATTERY IS FULLY CHARGED WHEN ALL FIVE
LEDS ARE ON.
4.6. Should the bicycle not be used for 10 minutes, the
controller will turn off automatically, to start the bicycle just
press the power button.
107