BEFORE YOU LAMINATE
Use Fellowes
®
brand pouches
for best results.
Select correct
pouch size for
laminated item.
LAMINATION STEPS
1
Slide power button to
setting and wait for green
Ready Light.
TROUBLESHOOTING
Problem
Cause
Ready Light does not go on after extended
Laminator is in a hot, humid area.
time.
Pouch did not completely adhere to item.
Laminated item may be too thick.
Jamming
Pouch was not used.
Pouch was not centered or straight when fed through
Pouch/Document Entry.
WARRANTY
Fellowes warrants all parts of the laminator to be free of defects in material and workmanship
for 2 year from the date of purchase by the original consumer. If any part is found to be defec-
tive during the warranty period, your sole and exclusive remedy will be repair or replacement,
at Fellowes' option and expense, of the defective part. This warranty does not apply in cases
of abuse, mishandling or unauthorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION
• Plug laminator into
power outlet.
• Position laminator
so you have enough
space to allow
items to pass freely
through the machine.
2
Place item inside pouch
against the sealed edge.
To prevent jamming, use a
carrier when item is smaller
than the pouch.
Solution
Move laminator to a cool dry area.
Pass through laminator a second time.
Always put item in a pouch.
Align sealed edge with Pouch/Document Entry. Use guide
to center.
3
Place pouch, sealed edge
first, into laminator entry.
Keep pouch straight and use
the edge guide to center it.
TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. IN NO EVENT SHALL FELLOWES BE
LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ATTRIBUTABLE TO THIS PRODUCT.
This warranty gives you specific legal rights. You may have other legal rights that vary from this
warranty. The duration, terms and conditions of this warranty are valid world-wide, except where
different limitations, restrictions or conditions may be required by local law. For more details or
to obtain services under this warranty, please contact us or your dealer.
4
To prevent jamming, im-
mediately remove laminated
item from back of machine.
Let item cool on flat surface
for several seconds.
Need Help?
Customer Service:
US: 1-800-945-4545
Canada: 1-800-665-4339
México: 1-800-234-1185
www.fellowes.com
Let our experts help you with a solution.
Always call us first before contacting your
place of purchase.
3