Enhancements; Configuration - Nokia 6102i Guia Del Usuario

Ocultar thumbs Ver también para 6102i:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6102i_EN_ESv1_BIL_9248318_UG.book Page 63 Thursday, March 16, 2006 1:38 PM
for the currently selected access point. Select
and enter the access point name (APN) to establish a connection to an
EGPRS network.
You can also set the dial-up service settings (APN) on your PC using the
Nokia Modem Options software. See "PC Suite," p. 76. If you have set
the settings both on the PC and on your phone, the PC settings are used.

■ Enhancements

This menu is shown only if the phone is or has been connected to a
compatible mobile enhancement.
Select
Menu
>
Settings
menu if the corresponding enhancement is, or has been, connected to the
phone. Depending on the enhancement, select from the following options:
Default
profile—to select the profile that you want to be automatically
activated when you connect to the selected enhancement
Automatic
answer—to set the phone to answer an incoming call
automatically after 5 seconds. If
or Off, automatic answer is off.
Lights—to set the lights permanently On. Select
lights on for 15 seconds after a key press
TTY/TDD
>
Use TTY
> Yes—to use the TTY/TDD settings instead of headset
or loopset settings

■ Configuration

You can configure your phone with settings that are required for certain
services to function correctly. The services are browser, multimedia
messaging, remote Internet server synchronization, presence, and
e-mail application. Get the settings from your SmartChip, from a service
provider as a configuration message, or enter your personal settings
manually. You can store configuration settings for up to 20 service
providers in the phone and manage them within this menu.
To save the configuration settings received by a configuration message
from a service provider, see "Configuration settings service," p. 10.
Select
Menu
>
Settings
Packet data access
> Enhancements. You can select an enhancement
Incoming call alert
Automatic
>
Configuration
and from the following options:
S e t t i n g s
point,
is set to
Beep once
to set the
63

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido