Acura RL 1996-1998
without factory NAV
1. Remove the carpet panels to the left
and right of the console and remove
one screw per side.
(Figures A and B)
2. Remove the select lever cover
by pulling gently on both ends.
The cover is mounted on (4) clips.
(Figure C)
3. Remove the shifter trim panel along
with the "not a lighter" pocket
attached. (Figure D)
(Figure A)
Dash Disassembly
(Figure B)
(Figure C)
(Figure D)
99-7806B
4. Remove (2) screws at the bottom of
the radio/climate panel. (Figure E)
5. Remove the air vents from the top of
the radio panel. (Figure F)
6. Remove (2) screws at the top that
hold A/C and radio panel in place.
(Figure G)
7. Remove the radio/climate panel.
(Figure G)
8. Remove the three buttons from the
factory radio panel and snap them
into the Metra radio housing.
Continue to kit assembly
2
(Figure E)
(Figure F)
(Figure G)