Dash Disassembly - Metra 108-FD6CH Instrucciones De Instalación

1. Open the passenger door and remove
the trim panel from the side of the dash.
(Figure A)
2. Open the glove box and remove the trim
panel on the right side. (Figure B)
3. Unclip and remove the trim/vent dash
panel. (Figure C)
2

DASH DISASSEMBLY

(Figure A)
(Figure B)
(Figure C)
4. Remove the rubber tray cover in front
of the shifter, and then remove the (2)
9/32" screws exposed. (Figure D)
5. Unclip and remove the front side panels
from each side of the center console.
(Figure E)
6. Remove the (2) 9/32" screws from each
side of the center console. (Figure F)
Continued on the next page
(Figure D)
(Figure E)
(Figure F)
|
1.800.221.0932 MetraOnline.com