Dash Disassembly - Metra 99-8905B Instrucciones De Instalación

1. Disconnect air selector cable on
driver's side of center console
behind dash above accelerator
pedal. (Figures A and B)
2. Open glove box and squeeze in on
sides of box to remove entire
glove box.
3. Disconnect temperature selector
cable on passenger side of center
console behind glove box.
(Figure C)

Dash Disassembly

(Figure A)
(Figure B)
(Figure C)
99-8905B
4. Unclip and remove the trim panel
surrounding the factory radio
including the a/c vents and climate
controls. (Figure D)
5. Remove (4) Phillips from the
factory radio. (Figure E)
Continue to kit assembly
2
(Figure D)
(Figure E)