Serta 49320 Manual Del Usuario página 5

Function Instruction
TO ADJUST SEAT HEIGHT
While seated, lean forward, lifting your body
weight from the seat. Reach underneath the right
side of chair and locate the flat-surfaced handle.
Lift the handle up slowly to allow the chair to rise
to the desired height. To lower seat height, lift the
handle slowly while seated.
TO OPERATE TILT LOCKOUT
Reach underneath the right side of chair and
locate the flat-surfaced handle. Slide the handle
all the way out (away from the seat). When the
handle is in this position, leaning back will cause
the chair to tilt backwards. To lock the chair in the
upright or vertical position, sit upright and push
the handle in (towards center of seat).
11
Customer Service Support: 1-800-379-9773
Turn the Star Base (2) upside down. Press the Casters (1) into holes at the end
Step 1
of each leg. Turn the Star Base (2) upright and insert Gas Lift with Telescoping
Cover (3) into the center hole of Star Base (2).
Customer Service Support: 1-800-379-9773
Assembly Instructions
1
2
3
2
4