6. OPERATING INSTRUCTIONS
Using the Neos IV hydrotherapy column's inverter switch you can
select the following functions:
Shower Upper
Upper hydromassage jet
Central upper hydromassage jet
Central lower hydromassage jet
Lower hydromassage jet
Simply turn the inverter switch (A) towards the desired position,
moving it in either direction, even when the water is running.
The temperature selector in the thermostatic model, allows you to
choose the desired temperature, by turning the selector (B) to the
left or right. As a precaution, for temperatures above 40º C, you
must press the red button while turning the selector.
If an instant heater or mixed boiler is used, these must guarantee
the aforementioned pressures and consumptions. If the output
power is less than 20.000 Kcal/hour, high temperatures cannot
be maintained during certain functions, and a loss of pressure or
temperature will be noted.
If the boiler is turned off and the water runs cold, adjust the tem-
perature and flow of the boiler as appropriate and if this does not
work, please consult the boiler's after-sales service.
The jets may be moved, allowing the direction of flow to be adjusted,
turning them towards the optimum position as required. The type
of massage can be selected in the same way, with independent
adjustments for the power and type of spray from each jet. (C)
A
C
B
6.1 WARNINGS
Despite the preventive and relaxing therapeutic effects of hydromas-
sage, in case of acute illnesses, heart conditions, serious high blood
pressure and certain types of infectious diseases, as well as for
certain people (children, the elderly, pregnant women), special care
must be taken regarding the duration, temperature and frequency
of the massage. In these situations, it is advisable to previously
consult a doctor.
Do not hang any objects on the bars, as these have not been de-
signed to support weight.
14