Description; Operation - Dustcontrol DC 2800c Manual De Instrucciones

Description

Th e machine should be used for suction and separation of
dried dust. Th e machine fulfi l the demands for separation
of unhealthy dust.
Th e DC 2800c is, despite it's compact size, a full capacity
Dustcontrol machine. It is stable, tough and reliable and
particularly suited to spot extraction in many diff erent ap-
plications ie: welding, grinding, sanding and cleanup with
the 38 mm program.
Dust separation is in any case as effi cient as with the larger
Dustcontrol machines.
Th e design is ergonomic and appealing. With a very low

Operation

Connect the unit to a suitable power source,
note requirements on the ID plate. If an
extension cord is to be used, only waterproof
cords are acceptable.
Th e DC 2800c is equipped with a fi lter in-
dication lamp that indicates when the fi lter
needs cleaning or changing. Th e fi lter is
generally cleaned once or twice daily during
normal continuous operation. Th e unit must
be in operation to perform fi lter cleaning.
Loose the tube from the suction pipe and
press the plastic cage against the black stop
head on the exhaust channel so that maxi-
mum pressure is created in the cyclone.
Open the port on the side of the unit three
to six times. Th is reverse pulse of air cleans
the fi lter.
Th e plastic sack should be changed only after fi lter cleaning is done and when the collected material level is about 5
cm under the foot valve.
Use only original Dustcontrol spare parts.
2009-05-26
sound level of 70 dB(A) at 1 m distance, the
DC 2800c is suitable for use in areas which are sen-sitive
to noise. Th e direct drive two stage high pressure fan is
integrated into the units top. Th e 1 200 W capacity fan is
double insulated for higher safety.
DC 2800c, 10
Part No 94112