Safety Tips; Tools Required - Westinghouse 5CY52BS Manual De Instrucciones

GS_Cyclone 1/12/06 12:29 PM
GB
1. Proceed with caution. Read all instructions before beginning the installation.
2. WARNING! This fan may be operated only with a 2-pole switch with a 3mm contact opening each.
3. Only an authorized electrician should execute the installation.
4. The installation height, i.e. the distance between the blades and the floor, should be at least 2.3 m.
5. Make sure there are no obstacles in the rotation area.
6. Make sure the fan is securely fastened at the ceiling.
7. WARNING! Do not use a dimmer type switch to control the fan speed.
8. WARNING! To prevent injuries, make sure the blades are not bent and that there are no objects within the area of rotation.
9. WARNING! Due to European safety regulations, if the flush mount option is elected, the fan must not be re-installed utilizing
the downrod. If attempted, this may cause a serious injury. Please consult with local regulations should you have any questions
about this important safety requirement.
10. WARNING: Do Not use this fan in the same room at the same time as a gas or fuel burning fire, unless the flue has been
tested under these conditions of use by a competent person.
Page 5
READ AND SAVE THESE INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

TOOLS REQUIRED

Phillips Screwdriver Wire Cutters Pliers Step Ladder
5
GS-MULTI-Cyclone-WH06

SAFETY TIPS