Control Panel Description; Starting The Unit - mundoclima MH-10-V2 Manual Usuario

CONTROL PANEL DESCRIPTION

OPERATING INSTRUCTION

STARTING THE UNIT

1. Firstly, turn the humidity control switch to the "OFF" position.
2. Plug in the dehumidifier.
3. Turn on the humidity control switch (to right side) and turn the same
switch to the reading of the desired humidity (60% in general as
shown on position"4").
TURNING OFF THE UNIT
1. Turn the humidity control switch to the left side to the "OFF" position to
cut off the power supply, then the unit stops operating.
2.
If the dehumidifier is not in use for a long time, please disconnect the
power cord plug from the outlet.
WARNING
1. The dehumidifier may not operate, when the humidity higher than the
4