Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ambient humidity.
2.
When indicating light which shows the tank is full illuminates, please
pour the water out of the tank and put it back. Then the product will
resume working.
3.
When the product shut down, please wait at least 3 minutes before
restarting the unit to prevent damaging the compressor.
4.
The humidity and its related position number on the humidity control
switch:
CONTROL SWITCH
POSITION NO.
8
7
6
4
2
5.
The applicable operating temperature range for this unit is 5-32 .
6.
If the dehumidifier can't start (the indicating light does not illuminate)
or the dehumidifier shut down unreasonably, please make sure
whether the plug is connected firmly to power supply. If the plug and
power supply are in normal condition, please wait for 10 minutes
before restart the unit (because it takes 10 minutes to reposition). If
the unit still does not start after 10 minutes, please ask your local
distributor service station to repair.
7.
When the dehumidifier is operating, it's a normal situation that the
working compressor may cause some heat and bring the ambient
temperature up.
8.
When the product is defrosting, related indicating light will illuminate.
APPROXIMATE
HUMIDITY SETTING
20﹪
30﹪
40﹪
60﹪
80﹪
5
Publicidad
Tabla de contenido
