Troubleshooting; Normal Sounds You May Hear; Before Calling For Service - LG WM0742H A Serie Guia Del Usuario

C A R E A N D C L E A N I N G
MAINTENANCE
(cont.)
Cleaning the Drain Pump Filter
Lint and other objects may accumulate and clog
the drain pump filter. If the washer fails to drain
properly, unplug the washer and allow the water
to cool, if necessary, before proceeding.
1
Open the drain pump filter access panel.
Pump
Filter
Plug
3
Remove the plug from the drain hose, and
allow the water to drain completely.
Twist the pump filter counterclockwise to
remove. Remove any lint and foreign objects
from the pump filter.
Reverse the above steps to reinstall the drain
pump filter and drain hose. Be sure to close
the cover panel when finished.
0
Drain Hose
Unclip the drain hose and pull it out. Place
2
the end of the drain hose in a pan, bucket,
or floor drain to catch water.

NORMAL SOUNDS YOU MAY HEAR

The following sounds may be heard while the
washer is operating. They are normal.
Clicking:
Door lock relay when the door locks and unlocks.
Spraying or hissing:
Water spraying or circulating during the cycle.

BEFORE CALLING FOR SERVICE

Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose
problems at an early stage. If your washer does not function properly or does not function at all, check the
following before you call for service.
Problem Possible Causes
Rattling and • Foreign objects, such as
clanking noise keys, coins, or safety pins,
may be in drum or pump.
Thumping sound
• Heavy wash loads may
produce a thumping sound.
• Washer load may be out
of balance.
Vibrating noise • Shipping bolts and/or
packaging materials not
removed.
• Wash load may be unevenly
distributed in the drum.
• Not all leveling feet are resting
firmly on the floor.
• Floor not rigid enough.
Water leaking • Fill hose connection is loose
around washer at tap or washer.
• House drain pipes are
clogged.
Excessive sudsing • Too much detergent or
incorrect detergent.
Staining • Laundry products added to
washer drum.
• Washer not unloaded
promptly.
• Clothes not properly sorted.
T RO U B L E S H O OT I N G
Humming or gurgling:
Drain pump pumping water from the washer at
the end of a cycle.
Splashing:
Clothes tumbling in the drum during the wash
and rinse cycles.
Solutions
• Stop washer and check drum and drain filter for
foreign objects. If noise continues after washer is
restarted, call for service.
• This is normal. If sound continues, washer is
probably out of balance. Stop and redistribute
wash load.
• Stop and redistribute wash load.
• See Installation Instructions for removing shipping
bolts and packaging.
• Stop washer and rearrange wash load.
• Adjust the leveling feet. Make sure all four feet are in
firm contact with the floor while the washer is in the
spin cycle with a load.
• Make sure that the floor is solid and does not flex.
Refer to "Flooring" in the Installation section.
• Check hoses. Check and tighten hose connections.
• Unclog drain pipe. Contact a plumber if necessary.
• Reduce detergent amount or use low-sudsing
detergent.
Only use detergent with the HE
(High-Efficiency) logo.
• Load laundry products into the dispenser.
• Always remove items from the washer as soon as the
cycle is complete.
• Always wash dark colors separately from light colors
and whites to prevent discoloration. If possible, do
not wash heavily soiled items with lightly soiled ones.
1