Setting Oven Lockout Feature; Options; Changing Hour Mode On Clock (12Hr, 24Hr); Setting Temperature Unit ("F" Or "C") - LG LRE3012ST Manual Del Propietário

SETTING OVEN & COOKTOP
LOCKOUT FEATURE
The START pad control the Oven & Cooktop Lockout
Feature. The Oven & Cooktop Lockout feature automatically
Locks the oven door and prevent the Warming drawer,
cooktop elements and most oven controls from being turned
ON. It does not disable the clock, timer or the interior oven
Light.
To activate the Oven Lockout feature:
1. Press and hold START for
2. 2 beeps will sound, "DOOR
To reactivate normal oven operation:
1. Press and hold START for 3
2. The oven is again fully operational.
CHANGING HOUR MODE ON
C L O C K(12hr, 24hr)
Your control is set to use a 12-hour clock. If you would prefer
to have a 24-hour time clock, follow the steps below.
Changing between 12 or 24 hour time of day
1. Press and hold WARM pad for
2. Press "1" pad. The display will
3. Press "1" pad to switch between
4. Press START pad to accept the
OPERATION (OPTIONS)
3 seconds.
LOCKED" will flash in the display.
Once the oven door is locked the
"DOOR LOCKED" indicator will
stop flashing and remain on along
with the lock icon( ) light.
seconds. A beep will sound
2 times. The "DOOR LOCKED"
will continue to flash until the oven
door has completely unlocked and
the lock icon( ) light will clear.
3seconds. "OPt" will be displayed.
show "CLO 12H"
the "12H" and "24H".
desired change.
SETTING TEMPERATURE UNIT —
FAHRENHEIT OR CENTIGRADE
WARM pad control the Fahrenheit or Centigrade
temperature display modes. The oven control can be
programmed to display temperatures in Fahrenheit or
Centigrade. The oven has been preset at the factory to
display in Fahrenheit.
To change display from Fahrenheit to Centigrade or
Centigrade to Fahrenheit:

SETTING BEEPER VOLUME

The beeper volume feature allows you to adjust the volumes
to a more acceptable volume. There are three possible
volume levels.
To set beeper volume
- 16 -
1. Press WARM pad for 3 seconds.
2. Press "2" pad. The display will
show "Unit F".
3. Press "2" pad to switch between
the "F" and "C".
4. Press START pad to accept the
desired change.
1. Press WARM pad for 3 seconds.
2. Press "3" pad. The display will
show "BEEP Hi".
3. Press "3" pad to switch beeper
volume (Hi, Lo, OFF).
4. Press START pad to accept the
desired change.