Publicidad
Idiomas disponibles
Idiomas disponibles
B10
B11
Connect 4" duct and vent to the outside. Use duct tape to
Install the wiring and the strain relief into the wiring
secure joints. If ducting does not fit securely, an adapter
access hole you made earlier.
may need to be purchased.
Go to
Section E -
Final Installation
on page 14.
Section C - Existing Construction – accessible from above
C1
NO EXISTING FAN
OR
Remove an existing fan and check to make sure the
opening is large enough to accommodate the new fan
housing. The opening needs to be 11" x 9 5/8".
42936-01 10/17/2007
9
Publicidad
