Philips FC6094 Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 39
If the adapter or charging base is damaged, always have it replaced
by one of the original type to avoid a hazard.
FC6092 only: if the car cord or car plug is damaged, stop using
the car cord and have it replaced by one of the original type.
Never suck up water or any other liquid. Never suck up ashes
until they are cold.
Never immerse the vacuum cleaner, the adapter or the charging
base in water.
Remove the adapter from the wall socket before cleaning the
charging base.
Only charge the vacuum cleaner with the adapter and charging
base supplied. During charging, the adapter will feel warm to the
touch.This is normal.
Always switch the vacuum cleaner off after use.
Keep the appliance out of the reach of children.
The voltage on the contact points in the charging base is low
(max. 30 volts) and therefore not dangerous.
Never block the exhaust air openings during vacuuming.
Switch the appliance off when recharging it.
To avoid the risk of electric shock, be careful when drilling holes
in the wall to attach the wall mounting bracket, especially close to
a wall socket.
Always use the appliance with the filter unit.
Always use the appliance with the nozzle insert in place.
Preparing for use
Attaching the charging base to the wall
1
Screw the wall mounting bracket to the wall with the screws
supplied with the appliance (fig. 2).
2
Attach the charging base to the wall mounting bracket (fig. 3).
3
Attach the nozzle & stick holder to the wall mounting bracket
(FC6094 only).
4
Screw the nozzle & stick holder to the wall with the screws
supplied with the appliance.
ENGLISH
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fc6092Fc6090

Tabla de contenido