Power Input - Steren CCTV-097 Manual De Instrucciones

1.- POWER: Turn on/off the monitor.
2.- (C1) Camera 1: Select to display the camera 1 only.
3.- (C2) Camera 2: Select to display only the camera 2 only.
4- AUTO: Automatic mode (select to watch two cameras sequence).
5.- VOL: Control the volume of the connected cameras, if the camera has
audio output.
6.-TIME: Allows to select transition time to watch each camera. You can cho-
ose between 2 and 20 seconds.
7.- POWER INPUT: Monitor´s power input.
8.-VIDEO IN C1: Camera 1 video input (yellow).
9.- AUDIO IN C1: Camera 1 audio input (white). Only if you have a camera
whith audio.
10.- POWER INPUT C1: Camera 1 power input.
11.-VIDEO IN C2: Camera 2 video input (yellow).
12.- AUDIO IN C2: Camera 2 audio input (white).Only if you have a camera
whith audio.
13.- POWER INPUT C2: Camera 2 power input.
14.- BRIGHT: Adjusts the bright of both cameras.
15.- CONT: Adjusts the contrast of both cameras.
16.- V-HOLD: Adjusts the cameras' video of both cameras.
17.- VIDEO OUT: Allows you to connect and additional monitor or recording
device (video).
18.- AUDIO OUT: Allows you to connect and additional monitor or recording
device (audio).
19.-Power Indicator light.
14 14
Controls