essentiel b ERBT 2 Manual De Utilización página 31

Assembling the thin (15) and thick (16) grating/slicing discs
1. Fit the drive shaft (3) on the motor unit (1).
2. Place the food processor bowl (4) on the
motor unit (1) and turn clockwise to lock
it.
Unlocked position
the food processor bowl from the motor
unit.
Locked position
the food processor bowl from the motor
unit.
3. Fit one of the discs (15 or 16) on the drive
shaft (3).
4. Place the lid (6) on the food processor
bowl (4). Turn it clockwise to lock it.
5. Place the feed tube pusher (7) in the lid
(6) and use it to push the food into the
food processor bowl.
6. Turn the appliance on by turning the
on/off button and setting it to a speed
suitable for the preparation (refer to the
"selecting the appropriate speed for
each accessory" table). Use the "Pulse"
function to operate it by pulsing.
N :
To use the "Pulse" function, you must first select a speed.
ote
N
: The food processor will not start if the food processor bowl (4) and its lid (6) are not
ote
properly fitted.
: you can remove
: you cannot remove
Ou :
Pulse
V.1.0
31
use