Delta 75802SN Instrucciones De Instalación

15-Year Warranty Delta Faucet warrants to the owner of this product that the product is free from defects in
material or workmanship for the period stated above from the date of purchase.
If this product malfunctions or becomes damaged, stop use and return it to the dealer where purchased or the
manufacturer (we recommend United Parcel Service):
If in the USA: If in Canada:
Alsons Corporation Masco Canada Limited
3010 West Mechanic Street 46 Bosworth Court
Hillsdale, MI 49242 Brantford, ON N3T 5N9
We will repair or replace, at our discretion, at no charge.
This warranty gives you specific legal rights. You may also have other rights that vary where you reside.
For assistance with problems with installation: In the USA, call toll free 1-800-421-0001, 8:00 a.m. to 6:00 p.m.,
Eastern Standard Time, Monday - Friday.
Garantía de 15 años Delta Faucet garantiza al propietario de este producto que se encuentra libre de
defectos en materiales o mano de obra, según lo indicado arriba, a partir de la fecha de compra.
Si este producto no funciona o se daña, deje de usarlo y devuélvalo al distribuidor donde lo compró o al
fabricante (recomendamos United Parcel Service):
Si está en los EE.UU.: Si está en Canadá:
Alsons Corporation Masco Canada Limited
3010 West Mechanic Street 46 Bosworth Court
Hillsdale MI 49242 Brantford, ON N3T 5N9
Nosotros lo repararemos o reemplazaremos sin costo, a nuestra sola discreción.
Esta garantía le otorga derechos legales específicos. Podría tener otros derechos que varían de acuerdo al lugar en que
reside.
Para recibir ayuda o si tiene problemas con la instalación: En los EE.UU. llame gratis al:
1-800-421-0001, de 8:00 a.m. a 6:00 p.m., hora del Este, de lunes a viernes.
Garantie de 15 ans Delta Faucet garantit au propriétaire de ce produit qu'il est sans défaut de matériaux ou
de fabrication, tels qu'indiqués ci-dessus, à partir de la date d'achat.
Si le produit est défectueux ou est endommagé, arrêtez de l'utiliser et retournez-le au magasin ou fabricant
(nous recommandons d'utiliser United Parcel Service).
Aux États-Unis : Au Canada :
Alsons Corporation Masco Canada Limited
3010 West Mechanic Street 46 Bosworth Court
Hillsdale MI 49242 Brantford, ON N3T 5N9
Nous réparerons ou remplacerons, à notre discrétion, gratuitement.
Cette garantie vous accorde des droits légaux spécifiques. Vous pouvez aussi avoir d'autres droits dans votre
lieu de résidence.
Pour assistance ou en cas de problèmes avec l'installation : Aux États-Unis, appelez sans frais :
1-800-421-0001, de 8 h à 18 h HNE , de lundi à vendredi.
Arc Wall Bar Installation Instructions
Parts Included 1. Position the wall bar and mark
location on the wall.
1a.
7-spray hand
Wall bar with shower with
Select a convenient height
slide mechanism flexible hose
based on your family's
needs. Remember to leave
enough slack for the hose
when the hand shower is
in the extreme up position.
Wall brackets Bracket Covers
4 Screws 4 Anchors
3. Final installation of wall bar.
3a.
Cleaning of Parts
For surface cleaning of parts, use
water and soap. Dry with a soft
cloth.
Note: Any other cleaning
product not specifically designed
for cleaning plastic or metal
surfaces may damage the finish.
Periodically it is recommended to
soak the hand shower in a 50/50 mix
of warm water and vinegar for 15
minutes to remove deposits.
Hold bar to wall
and align screw
holes with drilled
holes. Install
screws.
2. Drill holes
for brackets.
1b.
• For installation into ceramic tile,
use a carbide masonry bit or
tile/glass bit. If hitting a wood
stud, then use 3/16" wood bit.
Use a level to
Drill 1" depth in total. Insert
position the bar
anchors into the holes.
in a level vertical
position.
• For fiberglass/acrylic surfaces,
use toggle bolts (not included).
• For flat plastic surface, drill
Place wall brackets onto both ends
two 3/16" holes and insert
of the bar and mark the location for
anchors into the holes.
the drilled holes onto the mounting
surface.
4. Install hand shower.
3b.
Ribbed
Nut
Snap bracket
covers into place.
Remove existing shower
head from shower arm. Connect to shower arm
Your shower is equipped
with a vacuum breaker,
permanently installed in
the end of the hose with
a ribbed nut.
Do not try to tighten or
remove the vacuum
breaker, this could
damage the mechanism.
Hand tighten the ribbed
nut onto the shower arm.
Slide each bracket cover
Remove the yellow tape
over its respective wall
which indicates the end
bracket and snap into
of the hose to screw on
place.
to the hand shower.
To mount the hand Firmly seat the washer
shower to the arc into the tapered end of
bar, simply insert the the hose. Hand tighten
hand shower into tapered end of hose
the slide mechanism. directly to hand shower.
Tapered
Nut
75802SN