G4 WORLD RECORDER
OWNER'S MANUAL
SETTING THE SENSITIVITY SWITCH
On the left side of the G4 is the sensitivity switch. There are three
position, DX, NOR and LO. Always start with the DX position, as this
gives maximum sensitivity. If the station is extremely strong use the
NOR or LO position, the position with the least sensitivity. Basically,
TUNING IN STATIONS
With the G4 turned on, stations are tuned with the - + buttons in
manual or auto-tune mode and the Direct Frequency Entry System
in megahertz, MHz.
Manual Tuning
or down frequency.
Auto-Tuning
Pressing the - + buttons for longer than one second results in auto-
tuning, where the next available station is automatically tuned.
Direct Frequency Entry
With the G4 turned on, use the ENTER button and 0-9 buttons when
To enter an FM frequency, press ENTER, then punch in the frequency
number; for example if it's 103.7MHz, press 1 0 3 70. Note that you
must enter a '0' last.
9