Initial Settings - Steren TEL-220 Manual De Instrucciones

3. INITIAL SETTINGS

Before using your new Phone Set, follow these steps for a correct use of the equipment:
1.With the handset on the base, press Set. The message
Set 1 Date, starts to blink on the screen.
2. Press Set again, the year starts to blink. Use Up / Down
buttons to set the current year. Press Set once again.
3. Repeat last step to set month, day, hour and minutes. Press Set to store the changes.
4. The message Set 2 Code appears on screen.
5. Please enter the local area code. Use Up / Down buttons to type the code. Press Set to
store the changes.
6. Set 3 PCode appears flashing.
7. Enter the PABX code. If you are on a PABX and you need to enter a code to make external
calls, set it here. The phone will insert it when the dialed number is equal to or greater than
six digits. Use the buttons up / down to enter the code. Press Set to save your changes.
8. On screen appears the message Auto IP flashing. Press Set once again and select the
pre-established option (Off). Press Set to store the changes.
7 7