Lock; Caller Id - Steren TEL-220 Manual De Instrucciones

4. INSTRUCTIONS

4.10 Lock

If you want to block the outgoing calls, use the mechanical lock located on the back of the
phone set. You can still receive incoming calls.
1. Use the key (included) to turn the lock (20), to
the green point.
You cannot dial any telephone number that
begins with digit "0" (long distance calls). LOC
appears on LCD screen.
2. If you want to block all outgoing calls, turn the lock to the yellow point.
3. If you don't want to lock any call, turn the lock to the red point.

4.11 Caller ID

To review incoming calls, press Up / Down. Incoming numbers, date and time appears on
LCD screen. To visualize more telephone numbers, press Up / Down.
When you reach the end of the list or when there are no more stored telephone numbers in
memory, the message End appears on screen.
The phone set can store up to 38 telephone numbers on memory. When there are repeated numbers, the
message REP appears on LCD screen.
When incoming a private telephone number call, the message P appears on LCD screen.
If the incoming call is from another country or an area without caller ID service, the message 0 appears on
screen.
PUSH PUSH
OPEN
13 13