Project Source 19551-000 Manual Del Usuario página 5

3. Align holes in the mounting plate (B) with holes in
the outlet box. Secure mounting plate (B) to
outlet box with machine screws (EE).
Hardware Used
Machine Screw
EE
4. If you want to field cut the track section (F), mark the
track section (F) at desired length. Take into consideration
the length of connectors (not included) which may be
required for supplying power or attaching additional track
sections (sold separately). Remove end caps by
loosening end cap screws.
Secure the track section (F) and, with a blunt instrument
(a mallet, for example; not included), tap on the copper
strip on interior buss bars until they are dislodged.
Reattach the end caps with the interior buss bars in place.
From other end, measure track section (F) to desired length
considering end cap will add an 1/8 inch. With a metal
cutting saw, cut the track section (F) at mark.
Make sure the cut is straight with no burrs.
With one end cap in place, pull the copper strips out and cut
3/8 in. off of each strip. Push the copper strips back in and
replace other end cap or make connection to other track
connector (not included).
3
x 2
5
EE
4
F
Lowes.com
Outlet Box
B
F
F
F
3/8 in.
3/8 in.